Instructions
1. Put the cartridge on some paper towels in an area where you can
tolerate a spill.
2. Peal off the top label.
3. Fill the syringe with 19 ml. of black ink.
4. Very S-L-O-W-L-Y inject ink into any hole (they all go to the same sponge). There are currently 2 different styles of cartridges on the market. If your cartridge does not have filling holes under the label you will have to drill a hole through the top of the cartridge using a 1/16" drill bit.
5. When finished, replace the top label.
6. Check printhead for ink drips which can occur from installing to much ink. If ink drips appear sit cartridge on a dry paper towel until the drips stop.
7. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
If necessary leave cartridge in printer for up to 24 hours.
The cartridge will print just like a new one.
|
