Ink refill instructions for
1. Peel back the label to reveal the vent holes.
2. Insert the syringe through the vent hole, and push into the center of the cartridge. The cartridge contains sponge and a slight resistance will be felt.
3. Slowly inject up to 5ml. of ink or until ink appears at the filling hole.
1 Flip over the cartridge. Locate the sponge(s) on the bottom.
2 Inject the cartridge with about 2 cc of ink Be careful -- this sponge doesn't hold much ink!
Inject S-L-O-W-L-Y to fill the entire cartridge. Be sure to remove and re-insert the needle a few times to expose the entire sponge to the ink.
Note - Set on a paper towel for an hour as a drip precaution. Expect a few drips. Cover all holes during storage to prevent leaks and evaporation.
Unused ink may be returned to the bottle.
Replace the cartridge and run a priming cycle as per printer instructions.
|Click here to||track your order|
| We are PayPal Verified
So please, buy with CONFIDENCE!
Please click on the paypal icon for more information.
To Place An Ink Order
Visit our website at http://www.kingkahler.com or Email us at firstname.lastname@example.org
Copyright © 2000, King Kahler Bargains