
Instructions
1. Put the cartridge on some paper towels in an area where you can
tolerate a spill.
2. Peal off the top label.
3. Fill the syringe with
15ml. of black ink.

4. Very S-L-O-W-L-Y inject ink into
the hole closest to the copper strip. Any hole
will actually do, they all go
to the same sponge, but the first hole is closest to the
printhead. There are currently 2 different styles of cartridges on the market. If your cartridge does not have filling holes under the label you will have to drill a hole through the top of the cartridge using a 1/16" drill bit.
5. When finished, replace the top label
or leave it off (it will make no difference in the printing).
6. Replace the cartridge and run 1 - 3 cleaning cycles as
per printer instructions.
If necessary leave cartridge in printer for up to 24 hours.
|